CM-DKN Obstruction lights indoor controller

● Use the steel shell and spray coating techniques, resistance to corrosion, anti-UV.

● The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliable, it will not cause damage to the lightings and controller when connect the error line shortly.

● Control circuit use the MCU control, can simultaneously control 4000W load power / within 200 units aviation obstruction lights synchronized flashing or steady.

● Controller have 3 kinds operating modes: automatic, manual, close

● Automatic mode: automatically shutdown during the day, turn off the aviation light control output; automatically turn on at night an open aviation light control output.

● Work in manual mode: work status is forced open

● Work close mode: work status is forced closed, three operating modes can be switched by the user .

● The controller can also customize the fault alarm function, when one of the lights working abnormally controlled failed, the indicator on the controller can be shown, also could use the dry contacts to alarm the external environment .

● The function of this aviation obstruction light controller is very powerful, performance is reliable and safe. Use and maintenance are simple and convenient; and with anti-surge device, can be applied to a poor working environment.